I always did think 3pt didn't drop down far enough since new. I thought since position control was now on 1026r maybe that had something to do with arms not dropping down far enough. While picking up the Gator yesterday at the dealer, looked at a 1025 setting in the showroom . I noticed the 3 pt was about 4 in off the floor. I told the shop foreman that mine was at least 6-8 " off the floor. Using a box blade the other evening it was off the ground more than on the ground. Wasn't happy. We talked some and I said I would look at mine when I got home. Looking at both arms sticking back and from all measurements I could get when I put the 3pt parts together they all looked the same from either end to bolt hole for lifting the 3pt. None of the attachments were together because BH was on the tractor when it was delivered. Yea dealer could have and told me that evening he would help me put everything together, I said no , I needed something to do. Well yesterday after getting home switched the arms end for end and changing the lift and sway attachments. Yep there is a difference , 3pt now goes down to about 3-4" off the floor , didn't have a chance to try box blade last evening but should be much happier.
↧