Hey guys, need some help here with my 4310. All winter it has been starting intermittently, now it finally broke for good, easier to find the problem that way right?! Well I am pretty sure I found the problem today. It ran for a few hours and when it was shut off it wouldn't start back up. I fooled with it long enough to figure out it wasn't getting fuel, then figured out the solenoid on the pump wasn't opening to allow fuel flow to the pump. I started with the relay, wiggling it would make it work temporarily. I removed the relay and went to install a new one to see if that would cure the problem and it didn't. I put the old relay back in and now I can't even get it to work intermittently. The relay is grey in color and has pull tabs on it and all of the other relays are black. Does anyone know if there is anything different about the fuel shut off relay that I should know about? I didn't have a test light or volt meter handy today to help with troubleshooting so any help would be appreciated.
Junkman
Sent from my iPad using Tapatalk
Junkman
Sent from my iPad using Tapatalk