With inspiration from a thread about how to keep a drawbar from spinning, I decided to fix mine.
i used a standard cat 1 drawbar and fabricated a bolt on structure to incorporate a 2" receiver tube and framework to attach to the top link. Works well with the quick hitch. The plate is from an old leaf spring and the uprights are just 1&1/8" mild steel tubing.
It only works with the quick hitch though, as the two tubes are connected at the top by a welded in section of pipe.
i used a standard cat 1 drawbar and fabricated a bolt on structure to incorporate a 2" receiver tube and framework to attach to the top link. Works well with the quick hitch. The plate is from an old leaf spring and the uprights are just 1&1/8" mild steel tubing.
It only works with the quick hitch though, as the two tubes are connected at the top by a welded in section of pipe.