Hiya,
I had this on a 2520/200cx I had a few years back. It was only used on my driveway for snow. I upgraded to a larger chassis and this is simply not wide enough. It's been sitting in the barn unused so it's time to let go. No issues whatsoever, power angle so you will need a 3rd hydraulic circuit on your loader.
Currently setup for Deere 3rd hydraulic circuit connectors and location on the loader. Uses JD quick attach mounting found on the 200/300 series loaders and their re-numbered equivalents in the last couple years on the new 1, 2 and 3 series. This is a heavy, rugged commercial made unit for the power of these loaders/tractors.
Looking for $1200 and will deliver within a 100 mile radius of Manchester, NH free as long as you can safely off-load it out of a 4x4 pickup. (Hopefully you have the tractor/loader already ;-) )
Thanks,
Tom
DSC01134-10.jpg
DSC01135-10.jpg
DSC01136-10.jpg
I had this on a 2520/200cx I had a few years back. It was only used on my driveway for snow. I upgraded to a larger chassis and this is simply not wide enough. It's been sitting in the barn unused so it's time to let go. No issues whatsoever, power angle so you will need a 3rd hydraulic circuit on your loader.
Currently setup for Deere 3rd hydraulic circuit connectors and location on the loader. Uses JD quick attach mounting found on the 200/300 series loaders and their re-numbered equivalents in the last couple years on the new 1, 2 and 3 series. This is a heavy, rugged commercial made unit for the power of these loaders/tractors.
Looking for $1200 and will deliver within a 100 mile radius of Manchester, NH free as long as you can safely off-load it out of a 4x4 pickup. (Hopefully you have the tractor/loader already ;-) )
Thanks,
Tom
DSC01134-10.jpg
DSC01135-10.jpg
DSC01136-10.jpg