All,
I have a question regarding how level the H120 quick attach bucket should be. As best as I can determine on level pavement, the left arm measured where the bucket attaches is slightly off, between 3/8" and 3/4", depending on how high the bucket is lifted. I know that when I lower the bucket to the floor it definitely touches on the left before the right. The tractor (1025R) only has 6 hrs on it, and the H120 was dealer installed. The tractor is level, the frame and H120 mounts are all level to the ground, and there is no damage or strain to the arms that I can find - they really haven't been worked all that hard yet. Just some scraping and pushing loose dirt around with a ratchet rake, and some light scooping and toting. I'm assuming it's been this way since delivery.
I've searched the forum for something on this, and did not come up with anything.
1. What is a reasonable tolerance on how level the bucket should be?
2. If mine is too far off, what is the best way to adjust the level?
Thanks.
I have a question regarding how level the H120 quick attach bucket should be. As best as I can determine on level pavement, the left arm measured where the bucket attaches is slightly off, between 3/8" and 3/4", depending on how high the bucket is lifted. I know that when I lower the bucket to the floor it definitely touches on the left before the right. The tractor (1025R) only has 6 hrs on it, and the H120 was dealer installed. The tractor is level, the frame and H120 mounts are all level to the ground, and there is no damage or strain to the arms that I can find - they really haven't been worked all that hard yet. Just some scraping and pushing loose dirt around with a ratchet rake, and some light scooping and toting. I'm assuming it's been this way since delivery.
I've searched the forum for something on this, and did not come up with anything.
1. What is a reasonable tolerance on how level the bucket should be?
2. If mine is too far off, what is the best way to adjust the level?
Thanks.