Got my season's 4 cords a couple weeks ago and put Johann right to it. Years up to now I've been using my GX335 w/Johnny Bucket JR to do the wood. It will load a full bucket, but it can't stack it, you have to bend and lift, bend and lift, repeat... This FEL CAN!
Staring down the pile!
wood a.jpg
Lift it right up to the top of the stack and carefully dump it. Stack is a bit above 6'. I put about 3 buckets on the pile at a time. Then just stand in the bucket part way up when it gets high, arrange the wood and go for another bucket...
wood 2.jpg
Another one going up...!
wood 3.jpg
Remember this is NOT a self levelling type of bucket, don't roll any back off (One is all I recommend, just for a quick "test"!:laugh:) Now it's all done and ready for winter and we're @ 47.5 hours and we all know what entertainment is next!
Staring down the pile!
wood a.jpg
Lift it right up to the top of the stack and carefully dump it. Stack is a bit above 6'. I put about 3 buckets on the pile at a time. Then just stand in the bucket part way up when it gets high, arrange the wood and go for another bucket...
wood 2.jpg
Another one going up...!
wood 3.jpg
Remember this is NOT a self levelling type of bucket, don't roll any back off (One is all I recommend, just for a quick "test"!:laugh:) Now it's all done and ready for winter and we're @ 47.5 hours and we all know what entertainment is next!