Tier 4, 5045E
Two fold question. Someone at the dealership I just bought my new one at said I wouldn't like the way the tractor sounded when it first starts and blames the tier 4 requirements. Tells me it gets...
View ArticleClik here to view.
found a new use for the old seat springs
i traded in my simplicity tractor nearly 2 years ago on my 1026. the only thing i miss about the simplicity is being able to stripe my yard.that is until now!roller.JPGphoto 5.jpgphoto 4.jpg Attached...
View ArticleLA105 Brakes
Our brakes just quit working on our LA105 John Deere, can anybody give us some info on how to ajust them, we tried what we thought where adjustment bolts, but they where super tight, and i dont think...
View Article1025R momer deck dropping
I was cutting the grass today and I noticed that when I raised the mower deck to the transport position using the SCV, in a short time it would just return to the lowest position. At first I thought i...
View ArticleBackhoe for 1023e
I'm trying to convince my wife that we(I) need a backhoe.... My questions are... 1) Does it operate the same on a 1023 vs 1025(6)? 2) Does it hook up the same (assuming, yes????)
View ArticleClik here to view.
Work light plugs
After reading more then a few posts about work lights I decided that I needed them on my 1025r. I ordered a set of 27 watt LED lights and a pair of horse blinders. These would be used for winter snow...
View ArticleClik here to view.
Cookies, So I Thought
So, It hasn't been since last Xmas that anyone in the family made homemade cookies. I come tooling into the kitchen from being outside and not a soul in sight but the aroma of fresh cookies throughout,...
View ArticleJohn Deere 4300 Losing Power
I have a 2000 JD 4300 with 1,100 hous on it. The past few times I mowed, the tractor seems to suddenly lose power. RPM's gradually drop from 3,000 to 2,000 or so as if the motor is under heavy load...
View Article345 fuel spraying on exhaust... help
I have a problem with my 98 JD 345. It started leaking fuel several weeks ago so I ordered a carb rebuild kit. Took off the hood and the metal guard to get to the carb and when I start it up it was...
View ArticleGrapple Rake hyd lines pressurize from sunlight
Hello, I sometimes remove my grapple rake outdoors, and the hydraulic lines pressurize to the point where you cannot hook them up to the tractor because the little button on the coupler won't allow you...
View ArticleHello from NW Pa
Hello, Glad to find this forum. I am retired and I have decided to restore my dads 1979 Model 212, I have had this since his passing in 85, so I hope I can find some good info here.
View ArticleJD 3033R trailering issue
I had a heavy duty tandem trailer custom built for my 1026r that had a long ramp which aided in overcoming the lack of height on the MMM. The bottom of the deck would still drag on the hinge but would...
View Article1026R Losing Power and Stalling
I just finished mowing 4 of the 6 acres I needed to mow today and the tractor stalled while under WOT. I got it started, but have yet to get it running long enough to mow with. Tractor has 281.5 hours,...
View ArticleClik here to view.
This is why my tractor is always clean.
I have to constantly clean up after myself. :laugh: ImageUploadedByTapatalk1410140984.247083.jpg ImageUploadedByTapatalk1410141000.191221.jpg The spout on my 20 yo diesel fuel can broke. So I used a...
View Articlepowerflo attachment lx188
I have a LX188 which I am installing the powerflo bagger. I have been unable to find the part number for the double stack pulley. All help appreciated.
View ArticleWheel spacing and weights
Well, 55 hours on my 2013 JD 4720, and had my first near miss. I was moving a 40' gooseneck trailer with my pallet forks, and darn near rolled it, in some old vehicle ruts. Now I'm thinking of spacing...
View ArticleHydraulic fluid not showing.
Hello GreenTractor folks, I was using my PTO sprayer today and when the rear PTO was running I noticed the hydraulic sight glass on my 2032R was absolutely empty! Nothing showing at all. However when...
View ArticleClik here to view.
The First Inch, SNOW
Eeesh!!! uploadfromtaptalk1410181571558.jpg Sent from my SGH-I747M using Tapatalk Attached Images uploadfromtaptalk1410181571558.jpg (99.0 KB)
View ArticleMX6 Blade Removal
Having a heck of a time removing the blades from my MX6 rotary cutter. Can someone tell me if they are normal right hand threads or left?
View Article2520 Light Options
I have been doing some searching and curious what other guys are using for additional lighting on their tractors. I would like to add two forward facing and at least one rear facing light. Deere sells...
View Article