Have a Country Manufacturing 2 - ton trailer on the way. I agonized over size but went with the larger one. Will pull it behind my 3320 but also want to pull it with my kubota b5200. My 3320 has the appropriate hydraulics but would like to add the ability to dump the trailer with the Kubota. Here in lies my questions:
1) what size bore should I go with? The cylinder needs to be 24" in length to work properly. The b5200 tractor puts out 4gpm at like 1600psi(not a lot). Anyone with the trailer have any experience with this?
ImageUploadedByTapatalk1399333026.261991.jpg ImageUploadedByTapatalk1399333035.343774.jpg ImageUploadedByTapatalk1399333042.871316.jpg
2) what options do I have to add a 3rd svc or diverter. Looks like a single hard line runs to and away from the loader valve and a soft low pressure return is also present. Any thoughts?
Thank You - Dana
1) what size bore should I go with? The cylinder needs to be 24" in length to work properly. The b5200 tractor puts out 4gpm at like 1600psi(not a lot). Anyone with the trailer have any experience with this?
ImageUploadedByTapatalk1399333026.261991.jpg ImageUploadedByTapatalk1399333035.343774.jpg ImageUploadedByTapatalk1399333042.871316.jpg
2) what options do I have to add a 3rd svc or diverter. Looks like a single hard line runs to and away from the loader valve and a soft low pressure return is also present. Any thoughts?
Thank You - Dana