So in anticipation of getting my new tractor I've been watching videos of how to use some of the implements. Specifically the box-blade.
It seems like an adjustable top-link is required so that you can adjust the angle of the box to the ground when in the down position. Has anyone installed a hydraulically actuated top-link on a 1025R? I believe there are additional valves, etc. available, but what specifically would be required for this install? Might even be nice to have adustable lower links as well to pitch the box for ditch maintenance.
How do you guys do this? I assume the stock 3-point links are adjustable with tools. (Didn't really look closely at them to tell the truth.)
It seems like an adjustable top-link is required so that you can adjust the angle of the box to the ground when in the down position. Has anyone installed a hydraulically actuated top-link on a 1025R? I believe there are additional valves, etc. available, but what specifically would be required for this install? Might even be nice to have adustable lower links as well to pitch the box for ditch maintenance.
How do you guys do this? I assume the stock 3-point links are adjustable with tools. (Didn't really look closely at them to tell the truth.)