I am wondering WHY JD uses a 5 pin relay, JD # LVA13729 which runs about $13.oo at my dealer, when in fact on my tractor only 4 pins are used?
The diagram shows this in all the ones I have seen.20140712_144428.jpg Picture shows 1 black, 1 white & 2 red wires. All three relays in my 1026R are only using 4 pins of the relay.
20140712_141714.jpg if you look in the center of the socket, there is NO contact connector.
Just wondering as the 5 pin relays cost much more than the 4 pin.
I had one go bad & discovered this.
Thanks!!
The diagram shows this in all the ones I have seen.20140712_144428.jpg Picture shows 1 black, 1 white & 2 red wires. All three relays in my 1026R are only using 4 pins of the relay.
20140712_141714.jpg if you look in the center of the socket, there is NO contact connector.
Just wondering as the 5 pin relays cost much more than the 4 pin.
I had one go bad & discovered this.
Thanks!!