Skid Shoe Equipped Rear Blade on Gravel Driveway
After 2 years of working with the front loader on my 2720, I'm looking to improve my snow removal methods. I have a gravel driveway and end up picking up a fair bit of gravel even when I try to leave...
View ArticleJD 2305 problems
I have a JD 2305 tractor with about 200hrs on it. I've had a couple issues with it and would like to have feedback if you've had similar issues or know what the problem could be. I mainly use the...
View ArticleSafety Cut Off While In Reverse
Anyone disconnected this on a 24HP 54 inch Cut, if so how? thanks.
View ArticleClik here to view.
Junkman's sprayer build
Following a thread a few weeks back I got inspired by a fimco custom sprayer project. So I decided to go to my local farm and fleet and pick one up while they were on sale. My profession is ag...
View ArticleHydraulic Leak
Hey folks quick question. I changed the hydraulic fluid last week and now it seem to have a leak around the cover for the screen. Perhaps my O-ring was damaged. Any suggestion on how to remove the...
View ArticleClik here to view.
"New" Snowblower - more of a project
Well after getting my 1025R I've been looking to get a snowblower. I made the decision to just get the bare minimums when I financed (tractor, mmm, FEL) and purchased a box blade after. I've been...
View Article4230 transmission issue
I have an early 70's 4230 and it won't move when in first, third or low reverse. Second, fourth and high reverse gears seem fine. Issue is the same whether in A, B, C or D range. When I let up on the...
View ArticleLong post hole digger handles
I broke my fiberglass digger handle. I am getting ready to start digging deep holes for posts in my cow pen. I am having a hard time finding handles over 48". Does anyone know where I can order some 6...
View ArticleLx 266
Hi! I have located a LX-266 with what appears to have the Kohler Command engine, 119 hours on it. Sounds low to me for that vintage. He's asking $1800. Does that sound reasonable? Thank you!
View ArticleJohn Deere D105 wont start
I have a D105 that I bought new last summer. I was mowing the yard the other day when I ran into a small stick, maybe 1/4 to 1/2" diameter. Immediately after hitting the stick the engine stopped moving...
View Articlehello from NE Wisconsin
first john deere ,1025r with loader,pallet forks, 54 inch deck, ballast box and 48 inch boxblade. Always had good old tractors, first new one.
View ArticleClik here to view.
Father's Day 2014
I'm all set here.:lol: Just ordered myself a Dewalt DCF880B, 20V MAX* Lithium Ion 1/2" Impact Wrench (Tool Only) DCF880B_1NB_500X500.jpg My big, heavy, old, electric 1/2" impact, bit the big...
View ArticleUh oh, the word's gettin' out
Right out there in the open for the general public to read! I bet the government is in total CYA mode.:laugh: Mowing dilemma: High-ethanol fuel may ruin small motors : Lincoln, NE Journal Star Amazing...
View ArticleFuel drip?
A pretty good drip from tube coming from carburetor on gx255 any ideas? I guess I should add it's after mower is off and intermittent on when it happens. Sent from my iPhone using Tapatalk
View ArticleItalian Multi One
This is one impressive tractor if that is what you would call it. It has a Yanmar engine and it has enough attachments to supply everyone's needs. It looks like they have 3 sizes. Watch the video if...
View Article1025R Three Point Hitch???????
Probably stupid question, but how high should the 3 pt hitch go. I have a scraper blade and distance from blade to ground when picked up by hitch is approximately 4 inches, is this about right or is...
View Article62D adjustment on 2520
I have a 2520 with a 62D mower deck, I noticed while mowing today the the right front (as you are sitting on the seat) is lower than the rest of the deck. When I measured it with a tape measure it is...
View Article111H. Thoroughly confused. Separate fluid reservoirs for pump and xmission....
Seems like every owner of these older JD riders assumes that the transmission fill is under the seat. Unless I'm wrong, and the Tech support at Peerless/Tecumseh is wrong, Then those owners are...
View Article1026r 4WD Shaft Leaking after wrapping grass around it
Well, I was cutting brush and I needed to use the 4wd to make it through some of the terrain. A while later, the tractor wouldn't move anymore. I looked underneath and all the tall grass had wrapped...
View Article