790 clutch slipping
New to forum guys, and new to the tractor business, so please forgive my ignorance. I have a JD 790 4x4 and I believe the clutch is slipping. I was pushing some brush and all was working fine and then...
View Articlewould this work on my 1025r
Looking at getting a brush hog and wanted to know if this would work CountyLine® Rotary Cutter, 4 ft. W - Tractor Supply Co.
View ArticleJohn Deere 245
New to this site-----is this the forum I can ask about a problem with JD 245 RIDING LAWN TRACTOR?
View ArticleNo forward or reverse
Jd 245 running fine -finished mowing-parked it. Following week started it, but it would not shift into gear. Checked hydrostat transmission at dip stick and was full. Brake is not on. Shift lever just...
View ArticleClik here to view.
3 Point Multipurpose Hitch
For several reasons I decided to build a new 3 point trailer hitch / weight bracket / ????. Now that I have a FEL, and eventually forks (:yahoo:) I'll need some extra weight on the back. Orange weights...
View ArticleOpti-Lube XL Xtreme Lubrication . . . ??
Got an email today about a new product from Opti-Lube. According to the email and the link provided, Opti-Lube XL Xtreme Lubrication far surpasses what Opti-Lube Summer Blend does in performance. It...
View ArticleX475 front bade quick attach
looking for a front quick attach for a blade set up or a complete set up with a blade. you can pm me here or email me: meeder251@aol.com
View ArticleRIP, James Garner
I always loved him in the "Maverick" series, as well as "The Rockford Files".
View ArticleWtb 54c or 54hc deck for an x485
Im looking for a 54" deck for my x485. I currently have a 62 that i would love to swap for a 54. If you are interested in swapping great! If not i would still buy the 54". Sent from my iPhone using...
View ArticleClik here to view.
Ordered a SB1148 for the upcoming snow event season.
After many hours of bucketing snow last winter, we had 112 inches last winter & NONE of it melted until April and having the Mrs. upset about the damaged grass, I decided to get a SB1148, 48" 3...
View ArticleNewbie with 1025R
Just dropping in to say hi. I"m sure I'll have a ton of questions as I never have touched a tractor before. Really excited to get one, been wanting on forever (10-15 years). I received tractor with a...
View ArticleNew 1025R with loader, 60" Mower with mulch kit, 48" box blade and a ballast box
Starting my own thread to ask questions about my new purchase. Please have some patience as I am tractor stupid.....LOL (no really) So I'm still at rookie status. Mowed once with the loader on and the...
View Article420 Bulldozer water pump
I have a 420 John Deere bulldozer from the early '50's. I want information on how remove the water pump. don't see bolts.
View ArticleStolen Equipment
We had a break-in at our property in the country. I just got home from there. We lost 2 4-wheelers, a 16' dove tail tandem axle tilt car hauler trailer, a brand new 37 ton log splitter, air compressor,...
View ArticleClik here to view.
Gt262 steering linkage
The previous owner had the steering linkage held together with baling wire which is no longer holding. Ive searched parts online and at a loss here. Only thing I can think of is to drill a hole through...
View Article2520 will not start after oil change
At the 200 hour mark I changed my 2520 motor oil. I used the oil my JD dealer sold me, which turned out to be the wrong viscosity. I used JD 15W-40 instead of the recommended 10W-30. The tractor ran...
View ArticleMowing RPM on tach
I'm just wondering what RPM everyone sets their tach on while they're are mowing? I seen one guy that mows at 2000 rpm. I used to mow with my rpm set at the 540 setting and have since brought it down...
View ArticleWTB 54" Snowblower
Just what it says. already have the quick attach, up stop and mid pto shaft. Just looking for the blower and maybe the little front pto shaft somewhere/somewhat close to 01529. Whenever I see one for...
View ArticleJD 430 Hydrostatic Fluid
What is the correct Hydrostatic Fluid for a 430 L&G Tractor. Just acquired two. One that needs some work, and a "parts" machine with a good engine, but questionable tranny. I'm working on pictures...
View Article