Clik here to view.
60D Mower Issue
I accidentally cut the throttle down from high to low while the PTO was still engaged for mowing and the belt blew off the idler wheel and got jammed up. I think this spring is supposed to be tight,...
View ArticleClik here to view.
New 1025R
ok boys, I finally got around to posting about my new machine. after lots of research, especially reading tons of posts on this forum, I took the plunge in February for a new 1025R. It was delivered on...
View ArticleClik here to view.
What Did You Break Today?
Me? I broke BOTH my ROPS lights. :banghead: Mowing around trees - got one in the front yard and one in the back. And you don't want to know what I've run my ROPS into the past few weeks....
View ArticleWanted: Round Fender 110H or 110 Southeast Mo.
Looking for a round fender 110H, preferably with rear ags and integral hitch. I'm looking for one in good shape, mechanically and cosmetically. Must run good. I'm located about 60 miles south of St....
View ArticleFrontier RC2060 or Deere MX-5 for 2032R?
Would like to get opinions regarding the referenced rotary cutters, as I am in the process of finalizing deal for my new 2032R, CFO has given approval:good2:. Dealer has both cutters on the lot and the...
View ArticleClik here to view.
Front mount snowblower - is this broken?
1023e, 113 hours with 62 of those spent blowing snow this winter. This is the 54 inch front mount blower. I greased it for the last time a few days ago and have grease coming out of the welded ends as...
View ArticleExtended Warranty On 4720
Well, it's been 2 years already, and my warranty is about to expire on my 4720. What do you guys think about the extended warranty? It is $750.00 to extend it 2 years (or 800 hours), and $450.00 to...
View ArticleZ225 Oil Leak
Hello all my first post here so I hope I posted this to the right section. I have a Z225 that is leaking oil out of the bottom of the motor, I believe it is the crackshaft seal.. But i'm not 100...
View Article2x20 FEL quick connect placement
Do any 2320, 2520, etc. owners ever have a problem with the FEL hoses catching on stuff while using the tractor? The 4100,4110, and 4115, as well as the new 1000 series all have the quick connects...
View ArticleClik here to view.
1026r 260 Backhoe Install
I just purchased and had a 260 backhoe installed on 1026r, now I have several gaps in the fender with scv valve. I assume because they had to remove. Is it unreasonable of me to expect the dealer to...
View ArticleNew 1025R on the way and a few questions
Hi all, Just made a deal on my first "SCUT" this past week. We just moved into a new place a couple months ago and I know most are going to say this will be way too much tractor for what I need, but I...
View ArticleHello from Virginia
I have been a John Deere owner for a long time. I purchased a 320 lawn and garden tractor a few years ago that had the original motor replaced with an 18 hp motor off a Sears tractor. The ignition...
View ArticleHats off to my dealer
That's something that you never hear, but they deserve it today. I recently bought a 1025R with the 60" auto connect deck, and I noticed that it was quite out of adjustment. After giving them a call,...
View Articlegaining a few inches for 200cx forks
I'm putting together my pallet racks for storing some of my implements. My racks are 72" high and I'm trying to keep the beams at the top. I have a set of QA forks(not sure if they are factory or home...
View Article1026 Rear Spline
After yet another squeeze under greasing session today I noticed that the rear driveshaft spline is dead dry. I gave it an extra couple of shots of grease into the universal, but nothing will come out...
View ArticleClik here to view.
Mower lift linkage broke
I noticed that the left side of the deck was not raising and found the left lift arm broke where the adjustable linkage attaches (number 15) in the exploded view. The adjustable linkage part number 7...
View ArticleCub Cadet Blades
I posted when I first came here how we ended up with a CC lawn tractor to cut our grass. Well yesterday I took the blades off to sharpen after two seasons of use and 5 out of 6 of the upturned wings on...
View ArticleClik here to view.
New 4720
I brought home a new 4720 yesterday. I had a hard time finding one now. I traded in my 3720. I needed something larger to cut and bale hay with. I wanted to buy new without the diesel emissions add-ons...
View ArticleClik here to view.
john deere 400 1979 loader, tiller, blower, mower
John deeer 400 tractor 20 hp 189 hours on rebuilt engine. Had 2300 hours on before rebuilt but had regular maintance oil changes also had complete maintanence every 500 hours(hydro oils and filters)...
View Article