Air filters?
So I was doing an oil change on the wife's Jeep and I noticed it needs a new air filter. What should I get for a replacement? I'm also not looking to a cold air intake or any thing like that. I know...
View ArticleCan't find this part
I have a 855 tractor. I damaged the 3-pt hitch top link or center link. I tried JD Parts & see the part is NLA The p/n is CH15282. This is the threaded end that attaches to the implement. The best...
View ArticleHas there been a change in Forum Actions
I went to Forum Actions to try and look for the threads Im following. Am I looking in the wrong place? I've been away from the site for a while. All I see in the menu is "mark as read".Thanks for the...
View ArticleGator 4x2 seat belts?
Hi, I have a 4x2 Gator and I was wondering if there was someway or a kit to install seat belts on it to deter the young passenger from moving around to much or sliding off. Thanks Sent from my iPad...
View Articleelectrical X595
New to the site and need your help! My X595 hesitated to start, I didn't wait for the glow plugs to cycle because the tractor was hot.The starter turned over real slow and then there was a pop and...
View ArticleRC2048 Gerbox Oil
I don't have a manual on my Frontier RC2048. What is the recommended gearbox lube? Is there a JD spec number requirement?
View ArticleGood morning from Pennsylvania
Good morning, I just joined the forum. I recently purchased my first fixer up green machine, a 314. Hoping someone can guide me in the right direction for any issues I might run into.
View ArticleJohn Deere 314 won't move forward or reverse
I recently purchased a 314 with the Kohler K321AQS engine. When I picked up the tractor the battery was dead, it didn't turn over, it didn't do anything. Installed a new battery cleaned up the carb and...
View ArticleGT245 PTO Clutch not working
I have a JD gt245. The bearing has came out of the pto cluch. Have ordered a new clutch #AM126100. I was able to get the bolt and washer off, which holds the clutch on. My question is how in the world...
View ArticleHello from OKLAHOMA
Appreciate the knowledge of the posters here - have a JD 5500 with front end loader with 390 flail mower Again, Thanks in advance for ideas and suggestions.
View ArticleFV590V engine question
My 345 is still cutting out when it is hot. It only cuts out when it is hot (80 or higher outside) after about 30 to 40 minutes of mowing. If it is cool it will keep running. If it does cut out, I...
View ArticleJust plain AWESOME
Watch the video. http://sploid.gizmodo.com/i-cant-sto...ine-1595185928
View Article1025R stock lights
could some one do a vid of the 1025R stock lights at night and have the fronts and the ones on the fender on so i can see if i need to have more lights i live out in the country so the closest street...
View ArticleJohn Deere 3 bag, 14 bushel Power Flow Bagger
I have a BRAND NEW, NEVER USED John Deere 3 bag, 14 bushel Power Flow Bagger system for sale. It was already installed on my new John Deere 1025r when I picked it up yesterday. After discussing it with...
View ArticleFEL confessions...
Ok, I now your not "supposed" to do this. I used my FEL to raise my sons up to use the hedge trimmers on very tall bushes that can't be reached from the ground. I believe this was not only safer than a...
View ArticleFirst post
Been member here for a while . Gust bought a new 1025R three weeks ago great GT have a f loader 60" deck ind lift:greentractorride:
View ArticleJD Low viscosity hydraulic transmissin oil for 855 utility tractor.
Im getting ready to change the five gallons or so of Hydraulic oil in my 855 tractor. I've always used Deers specified low-vis oil for this because I did not want to develop what could be major issues...
View ArticleMaple tree question
I have a red maple that a deer scraped last fall and pretty much killed it. Well everything from the scrape up died and is regrowing from the healthy trunk that is left. Question is can I cut the dead...
View ArticleMounting instuctions front 4100 quick hitch on compact 2520
I bought a 2520 at a equipment auction. It included a 62D mid-mount mower and a 54" front mount snow blower with the 4100 quick front hitch. I have looked on the Deere site for instructions/manual on...
View Article