Thinking of getting a JD 4x4
OK so this winter has been brutal as far as snow goes. I currently have a 425 AWS with a 48 inch deck that I used for grass cutting and a 425 with the front blade with the scoop attachment for winter...
View ArticleCharging system indicator light stays on
Was out clearing snow with my 4100 last night when after being at almost open throttle for about a half hour, the charging system trouble light came on. Back in November right after the tornado, I...
View Article2320 47 inch snowblower troubleshooting
I have a 2320 with a front mounted 47 inch snowblower and after a heavy snowstorm I'm noticing a loud clicking noise coming from the snowblower when it's under load, it was first apparent after a heavy...
View Article830 3cyl Rockshaft Linkage, need some help/information
have a question for the group and all help is appreciated in advance. On my 830 3cyl my lift stopped working one evening. It stopped in the up position. Drove it to my shop shut it down to see if...
View Article2520 Front Blade Angle Speed Backwards
I recently got the quick attach front blade with hydraulic angling for my 2520 and noticed a strange issue. When I move the joystick right to angle the blade right it goes slow. If I back it off to...
View ArticleWheels spacers for 2720/2032R with 62" MMM?
The question I have is relating to my new 2032R I've got the R4's and 62" MMM and I'm looking at Motorsport Tech spacers. I've got a couple of ditches here at my home address and I want to know how...
View ArticleJohn Deere 950 cylinder head
Hi, I have been helping my uncle get his 950 back in working order. One of the nephews got it a little hot while shredding and cracked the head... I was wondering if anyone knows of a place I could get...
View ArticleNew menber from Minnesota.
Hi to everyone. Hope to learn and give feed back. Grew up on a John Deere A with Grandpa since I was 7 driving it while picking up hay. Have drove others but green is a great color. To me that includes...
View Article2510 reverse
Bought a 2510 w/ 48 loader. everything works good so far with a few adjustments. One main problem is the reverses. Both hi and low reverse acts like it misses the gear and won't go. But when shifting...
View ArticleNew Member in Canada
Hi all. Recently purchased my first tractor and it's green! It is a 2012 2520 and H130 loader with 44 hours. Already added forward work lights and Artillian blinders. Have the bolt on grab hooks too,...
View ArticleClik here to view.
Ok now I'm Mad
I'm going to beat my paper boy over the head with this. Once I get it out :banghead: Its in there good to . Stalled out the tractor. Attached Images paper.jpg (300.5 KB)
View ArticleAnother call to the dealer - 2012 1026R
I am going to call the dealer but wanted to post this first for input from the experts on this site. Yesterday when I went out to do plow the drive, once again, I found the front axle oil level low and...
View ArticleClik here to view.
Yummy mushrooms.
Somebody mentioned mushrooms today and it got me to wanting some fungus. This is Steven Raichlen's recipe he showed on an episode of Barbecue University. Primal Grill with Steven Raichlen One of these...
View ArticleUpgrade from 3038e
Howdy! I am looking to upgrade to a bigger tractor from the 3038e. I need to retain 4wd, more horse power, and more capacity in the loader, etc. I also need a wider stance as my property is quite...
View ArticleClik here to view.
Modified 3PT sprayer
I purchased a fimco 40 gal 3pt sprayer with a small folding boom and wand. I wanted more sprayer hose and auto recoil of the longer hose. So I welded together some scrap and mounted an air hose reel on...
View Article3320 300x to 300cx loader
So, I finally found what I thought was the perfect tractor. However, I may or may not have made a mistake with the loader on it. It has the 5' bucket with a 300x loader. Sometimes I'd like the extra...
View Article1 series tranny guts.
I dont usually do this but I have a 1 series in the shop. I have to change out a center case on the transmission. I will take and post pics of the inner workings if anyone is interested on what is...
View ArticleIs there a new Marham/Gator???
Hi, In my 2 year absence from the world of tractor chatting I lost touch with Markham/Gator. I can't find Gator anywhere anymore, which doesn't surprise me, but did someone pick up where they left...
View Article1974 830 3 point problems
I'm having problems with my 3 point lift on my 1974 830. It will not raise up all the way with a load on it. I'm not sure what's going on. I have changed filter and fluid. There is a little lever in...
View Article