Any certified John Deere mechanics on this forum?
I was wondering if any real certified john deere mechanics on this forum? thanks
View ArticleClik here to view.
1026 seat mod
I found the seat on my 1026 leaned back too far so I made these adjustment screws to raise the rear of the seat. I drilled and tapped 2 8mm holes in the seat frame just above the rubber seat stops. I...
View ArticleClik here to view.
Help identify this engine part please (see pictures)
I was wondering what this was, I thought it might be the oil drain plug but it's not on the same side as the filter. The tractor is a John Deere 335 with the 20 hp Kawasaki air cooled engine. Thanks,...
View ArticleClik here to view.
62D mower adjustment and height knob lose
I noticed the the mower deck was cutting un level. It will need adjusted is there a quick way to do it, and what all tools do I need. Also I noticed that the height knob will move just a little bit...
View Article1026R Boom losing Pessure
I am aware SVC issues on the 1026R from reading here last evening would this also be attibuting to the boom losing pressure and lowering on its own. I will be contacting the dealer tomorrow, as I...
View ArticleJust for airheads!
The old company, Bombardier Aerospace, makes these. They dont land to fill the tanks---they touch down at approach speed, open the fill scoops, add lots of power, and the tanks fill in seconds....
View ArticleClik here to view.
Thanks for the help (pictures of my John Deere 335)
Thanks for helping with my question in my previous post. Here is my new to me 2001 John Deere 335 with 20 hp air cooled engine. Quite a few hours on it (1,100) but she cleaned up nice and runs great....
View ArticleInexpensive Point and Shoot Camera Recommendations
I know this has been asked before, but since I had my trusty old Kodak, I forgot most of those threads. Now, due to my 2 year old granddaughter, by Kodak is dead after all these years. So I want to buy...
View Article10th Annual Bellevue, MI Antique Tractor Show, Aug 9-11
Not a HUGE show, but we have fun! Like the slow tractor race, chain piling, the parade, etc. Come on over and help make this show BIGGER! http://www.bellevuemi.net/events/engineshow.htm...
View Article"09" 4720 Battery died while using tractor story
Tractor started normally and used it for 2 hours solid. Shut her down to move some vehicles, went to crank back up and nothing but clicks with some wild dash light show. I jumped it with the Yukon...
View ArticleHeavy hitch front weight bar?
Will a heavy hitch front weight bar with 42lb weights work with a h120 loader on?
View ArticleClik here to view.
2010 JD2305 For Sale
John Deere 2305 2010 Year Model 287 Hours Tractor only (no FEL, no MMM) Rear Tires are filled. Includes one set of 50# rear wheel weights (steel) Factory/Dealer installed Block Heater The tractor is in...
View ArticleClik here to view.
All cleaned and waxed
If somebody would've told me three months ago that I'd be out washing an waxing my tractor. I would've told them they're nuts. I've spent a little bit too much time on this form after purchasing the...
View ArticleLess Expensive "Heavy Hitch"
The Heavy Hitch reviewed on this forum is definitely a well made and versatile tool but they are a bit pricey at $290 for the one with the weight bracket and $190 for just the hitch w/o the weight bar....
View ArticleClik here to view.
Snow Plow build for 2305
These pictures are from my snow plow build for my 2305 Tractor. Made hoist and hitch brackets from ideas here and other sites. I thought I would share my project with everyone. I am now working on...
View ArticleParts Availability Question
Does John Deere Parts website tell you if a part is no longer available? I am trying to determine if a 59 inch front snow blower is compatible and if the front hitch and hardware are still available...
View ArticleClik here to view.
Looking for feedback on a cargo carrier idea I'm working on for my 1025r
I purchased a new 1025r a couple of weeks ago. It has a 60" mower, 647 Tiller, and the H120 loader. I have been looking at other implements, add ons, and customizations for it....nothing excessive as...
View ArticleClik here to view.
Broke my BH46... Could use some advise fixing it.
So I did the following today digging out a small hickory stump with a nasty tap root. I was curling the bucket and heard a pop.. didn't think much of it till I lost my curl and looked down and saw...
View ArticleClik here to view.
Trip to Mark Twain, and other Things
Me and my wife drove up to Hannibal, Missouri, home of Mark Twain. We met fellow GTT member Gary400, who had this waiting fo me: IMG_0214.JPG I just had to put it on my 318: IMG_0216.JPG I also...
View Article790 Question
I recently purchased a "like new" 790. The only problem I've found is that the lever to raise/lower the three point hitch (I think the technical term might be rockshaft lever) is extremely difficult to...
View Article