Quick disconnects
I finally decided to put disconnects on the cylinders of my plow over the summer. I got tired of getting fluid everywhere when I took the plow off for the season. I have to take it off in pieces as...
View ArticleJD 4230 PTO doesn't stop when disengaged.
The pto on our Power Shift 4230 doesn't stop when pto is disengaged. It would stop turning when engine clutch pedal is push in. We checked pressure at the brake and clutch ports . The brake when pto...
View ArticleGator dump bed wiring.
Hi, my uncle has a 95 gator 6x4, and he has wanted to add the dump bed feature to it for some time now. I have it here at my house to change the cam out because that, lovely, plastic cam gear decided...
View ArticleTool/Equipment Storage on Tractor
Any slick DIY ideas on how and where to store chains, slings, or other equipment on the tractor would be appreciated. What do you need to carry with you and how do you carry it?
View ArticleClik here to view.
The first dickeredness of March is on it's way Boys
Well this storm started right around 8:00am with sleet. Thankfully it switched to snow about 9:30am. Here we go. IMG_0626.jpg Attached Images IMG_0626.jpg (1.14 MB)
View ArticleEver consider LED or HID lighting upgrade...?
Hello guys, Does anybody out there ever consider upgrading the light bulbs to LED or HID with ballast...? Not that the oem doesn't work, it is already good, butmorelight output couldn't be a bad thing....
View ArticleRear 2" Receiver for X300 or X500
Good Morning.... I am looking for a rear 2" Receiver mounting bracket similar to the one shown in the video here for a X300 or X500. I have a small utility trailer that I would like to move around my...
View ArticleInteresting 1025R/H120 hydraulics finding...
After I had removed the bucket from my 1025R yesterday I noticed that the two sides of the JDQA were not even so I attempted to move one of them by hand and noticed that, not only are they easily...
View Article540 John Deere ??
Looking at buy a tractor with a serial number of M005DA711072. Can anyone tell me what it is and when was it made? Thanks Steve
View Article318 cut out when pto switch turned on
theseat safety switch has been disconnected since before I got the tractor 30 years ago, all of a sudden it kills the tractor. Where can the short be? do I have to trace it all the way down?
View ArticleUsed the 1025R and 54" snowblower first time.
Just took delivery of the 1025R on weds. and worked to get the 54" snowblower on it and finished that project Sat night getting ready for the predicted snow storm on sat night/sunday. Well, the storm...
View ArticleH120 Mast Bolts Loose
Guys, I've been doing some pretty heavy loader work this winter - pushing snow plow furrows back and up into piles to maintain roadway width. I noticed my loader making an occasional noise or movement...
View ArticleLog splitter
I was out cutting wood this weekend and my buddy was using a splitter that he attached to his 3 pt hitch on is bota tractor. He made it himself. It worked really nice. Was wondering if any of you guys...
View ArticleJohn deere 6030 with sound guard cab please help!!!
In this video that I took is a John Deere 6030 with a Sound Guard cab on it. This video was taken in July of 2007 in Goshen Indiana at the Elkhart County fair tractor pull. The tractor is out of...
View ArticleHydraulic filler plug/cap number help, please!
I guess I forgot to replace the filler plug for the hydro after I topped up last time.:thumbsdown: I have tried to use "Search" AND "Advanced Search" and I can't seem to find the right terms to bring...
View ArticleClik here to view.
Another Not So Strong Box Battery Bit the Dust
Last Saturday I went to get the 2305 out to do some pick-up chores and all I got was a slow turnover and then click....:nunu: The outdoor temp was great - in the 50's - 60's. I had just used the...
View Articlecast iron rear axle housing?
Talking new tractors, what is the smallest series that gets a cast iron rear axle housing?
View ArticleIndependent Hydraulic Mower Lift
So I have ordered the components to install the hydraulic lift as well as the independent valve kit. I am taking my good sweet time as the weather is cold as heck and we typically don't get enough...
View ArticleX7 signature series seat switch adjustment
Anyone had success making the seat switch less sensitive on an X700? I took mine (X739) out today and added a piece of 1/4" hard foam inside the cup using double sided tape. This compresses the switch...
View ArticleAny Woodturners out there..?
I'm looking to buy a wood lathe and would appreciate any and all advice on what brand/model I should get. Not interested in turning real long items, nor do I expect to turn large bowls from burls. I...
View Article