Clik here to view.
My "New" 3 Point Hitch
A friend of mine just made this 3 point hitch for my 318. It will go great with the iMatch hitch that Gary made for me. 3-28-13 024.jpg 3-28-13 025.jpg Attached Images 3-28-13 024.jpg (74.3 KB) 3-28-13...
View ArticleClik here to view.
1025R work light mod
With the Curtis cab installed, the fender mounted work lights are inside the cab, and therefore unusable. I unplugged and removed the lights, and tucked the original connector down inside the fender. I...
View Article5420 540E vs 540 rpm...
Recently acquired an 04 5420 MFWD and looking at the slot where the control lever should be for the switch to between 540 and 540E there is no lever! Was this an option on some tractors or am I in for...
View ArticleOld Spock battles New Spock in the greatest car commercial ever
Zachary Quinto vs. Leonard Nimoy: "The Challenge" - YouTube I got this from a friend tonight. I found it humorous and clever.
View ArticleEuropean vs. North American
What's the deal? Seems like there are more EU products, and they are quite a bit more feature rich. For example, on the EU site they have pull behind sprayers, all Na has are the self propelled ones....
View ArticleTractor sitting outside prior to purchase...
Hi everyone. I’m about to purchase a 1025r with FEL and 60” deck. The tractor has been sitting outside at the dealer now for four to five weeks up here in Vermont. We’ve had hot sunny days as well as...
View ArticleClik here to view.
You might get a free hat!
Between now and the end of June we're giving away 100 of our brand new Green Farm Parts hats randomly in 100 orders. Again, this is randomly so I don't have any control over it. The shipping department...
View ArticleClik here to view.
My 1026R isn't big enough
I pre-fab'd a section of wood privacy fence. It weighs about 350 pounds. The problem is I can't lift it high enough to get the fence posts in the post holes. :-( I have a feeling this is going to be a...
View ArticleClik here to view.
Oliver Model 10 Cotton Harvester
Back in its day, the Model 10 was considered to be a great cotton harvester. I was trying to find some other pics of this as well as another Oliver that's a different model. These only harvested two...
View ArticleMower deck axles for 4310
I am looking for a set of axle stands for a 72" deck for a 4310. I was thinking there might be someone who traded tractors and still had the stands. I just am too cheap to spend $134.95 for a set. It...
View Articlesuitcase weights on 3pt hitch?
I filled out the paperwork to get a 2320 today. Now I am looking at various attachments to order. I will be ordering a Omni or heavy hitch hitch for it. Is there something that bolts the suitcase...
View ArticleClik here to view.
What do you guys think of this??
I just bought a 1025r and want a box blade. For the time being I can't afford a new Frontier BB. I found this used Bush Hog for $325. Dealer says it has only been used a few times. Is this a good brand...
View Article72in deck from 4400 onto a 3520 with cab...will it work?
Picked up a sweetheart of a used 72" deck off of a 4400 and I would like to put it on my 3520 with cab. The deck came with all of the mounting hardware, draft arms, pto shaft and hydraulic cylinder....
View Article45 Loader for X7XX tractors.
Folks, In the process of deciding whether or not to step up into a 1026R or stick with the smaller X700 series. My question is about the loader. I am curious to find out if the 45 loader has valid...
View Article1026R seat bracket removal help
I need to remove the seat bracket but before I start I want to know exactly what to remove to take the seat bracket off. I have a new one coming as the old ones welds broke and the dealer said If I...
View ArticleHydraulic cylinder for JD 555h plow
Can someone point me to a supplier and size of cylinder for this 3 bottom plow. From what I could find a 2.5 - 3 inch cylinder with a 8 inch stroke should work. We will need to fit hoses also. TIA
View Article2013 Father's Day Thread
What are all you cool (me being the coolest) dads doing tomorrow, what are you hoping to get and what did you get?
View ArticleClik here to view.
I got two new caps in the mail. Has anyone else received the PIK yet?
Got this yesterday. My dealer has already put the kit on for me, though. ZYUR0ID.jpg Attached Images ZYUR0ID.jpg (515.3 KB)
View Article