John Deer 322 Drive Belt (Model #?)
Does anyone happen to know the Model # for the Drive Belt that would fit a 1989 322 John Deere w/ a 50in deck? I have been to my local John Deere retailer twice now only to receive the wrong belt...
View Article640 loader cylinder specs - wood splitter?
Wanting to make a new wood splitter and I'm trying to figure out if using the two main lift cylinders off my 640 parts loader would be strong enough for a heavy-duty splitter or if I should just bite...
View ArticleLoaded Tire Pressure & Scalping ???
I would like to know what tire pressure you are running or would recommend, with loaded R-4'ds on a 1026R. I just went over my mower (60D) setup again and have it dialed right in with the settings in...
View ArticleI guess I broke the 60D on my 1026R
It must be my fault, JD products are perfect. Anyway, due for my 50hr and will probably get this resolved then but if anyone has an idea....the issue is the deck won't raise or lower. Was working fine...
View ArticleInstalling A 3rd SCV On A 1026R
Guys, I installed a 3rd SCV kit on my 1026R yesterday. Total install time was 3.5 hours. The kit weighs about 25 lbs and contains: 1 Selective Control Valve, 4 hydraulic lines, 2 female Quick...
View ArticleNew Member from Portugal
I there my name is Danny, i have 31 y's and i'm a young farmer in part time in portugal:laugh: I have a farm with about 2 acres in Sintra Portugal, a very nice place to visit if you come here...
View ArticleIs the JD 1026r capable of hilly terrains!!!
I there i have a terrain with +- 2 acres in Portugal, with about half in grass and garden and the other half with fruit trees and some vegetables. After a study of all the machines avaible here...
View Article5065E rear hitch failed AGAIN -- 3rd trip to the shop
Well, out of the blue, the Service Manager called me, and asked if he could send a Tech to test my 5065E. Seems the Factory contacted him, and asked to have the Rear Hitch Valve tested, particularly,...
View ArticleBent loader storage bracket
So I spent fathers day weekend cutting and splitting firewood for next winter, almost done. At one point i was backing up and turning and there was an ominous shudder and one of the front tires pulled...
View Article6125R with 8 row 1750 planter
Think those two would make a good match to do 50+ acres soybeans/corn rotation? Or should one go for a 1760 split row so can do 30" and 15"? What would be good for tillage?
View Article54" mmm guage wheels...why two pins?
hi, I managed to lose one of the removable top pins on my 54"mmm deck on my 1023e...but then I realized that the lever on the wheel has a pin it controls to adjust the wheel height. So what am I...
View ArticleL130 transaxles
I am still trying to wet nurse this transaxle to life. It was working, although noisy, so I took it apart cleaned the filter and put in a quart of low viscosity hygard john deere hydrologic fluid, and...
View ArticleClik here to view.
47" SnowBlower JD 2320
Hello Just purchased a 2010 JD 2320 that came with loader and snow blower. Thinking ahead I decided to see if I would be able to attach the blower to the tractor. Need some help. Attached are pictures...
View ArticleClik here to view.
Verizon HomeFusion Internet
I think I'm going to get Verizon Home Fusion internet at my house. I have a wireless system now (not cell or satelite based), that's only good for 256K. It just doesn't cut it anymore. I can't get DSL...
View ArticleClik here to view.
Working in the dark with 1026R and H120 FEL
When it is 100 degrees during the day and the humidity is like a sauna, it is not smart for old folks like me to do heavy work during the heat of the day. Better to do the heavy work early in the...
View ArticleNew Member from NorCal
Name here is Robert and although I am joining this forum, I grew up and still a IH fan. Just recently though I bought a 67 JD 110H to play with and let me tell you I am getting a workout with it from...
View Article3720 paper tech manual for sale
Up graded from 3720 to 4720. Have brand new tech paper manual for sale. Used only 10 minutes. $150 plus shipping. Located in Minneapolis
View Article425 starts with gas in the carb and dies new fuel pump any ideas?
hey guys! New to the forum and we have had this 425 deere in the family since new and we have allot of good memories with her she has helped aid and build a beautiful property. Question- We recently...
View ArticleClik here to view.
Horse Stuck in Tire
Oh man, saw this on Reddit. This looks awful... The person that posted it said this: Quote: BTW - the horse is ok They were able to cut the tire to get the horse out.
View ArticleClik here to view.
New Landscape Rake
I just picked up my new LR 2072 rake this morning and can't wait to use it. It looks very sturdy and I hope the wheels were a good added purchase. Let the drooling begin :laugh:...
View Article